WAX BROWN AEROSOL

Temperature resistant -40 °C to 160 °C (sun, spray booth)
Odorless and silicone free
Good adhesion - perfect rust protection
Insensitive to road salt, brake fluid and chemicals etc.

Wax Brown Aerosol is a brown-colored wax-based anti-corrosion agent with high creeping ability. Wax Brown Aerosol provides optimal corrosion protection for cavities, metal structures, and the bodywork of cars, trucks, and buses, as well as in all areas at risk of corrosion. After the solvent has evaporated, the product forms a slightly sticky film with self-healing properties that is resistant to high temperatures (+160 °C). Wax Brown Aerosol does not crack or become brittle and can therefore also be used to protect the engine compartment.
Sealing and protecting edges, folds, axles, metal parts, and cavities throughout the vehicle and in the bodywork, such as doors, hoods, tailgates, frames, as well as in the engine compartment and on the underbody, as well as metal structures, plates, machines, devices, etc.
Shake bus well before use. Wax Brown Aerosol should be used with a pressure feed gun art. 5990 DBP (2-4 bar) and preferably in combination with probe set HRS 599 art. 5991. Due to the precise quantity control, the correct layer thickness must be applied for each application area. Subfloors can be sealed with hand spray pumps without compressed air (no annoying spray mist). Evaporation time, depending on layer thickness and evaporation temperature, is 3-5 hours. For cleaning contaminated body parts and processing tools or for removing Wax Brown Aerosol, sealant and adhesive remover KE 205 is suitable.
5469 Wax Brown Aerosol PP MSDS v001 DE
5469 Wax Brown Aerosol PP MSDS v001 EU
5469 Wax Brown Aerosol PP MSDS v001 FR
5469 Wax Brown Aerosol PP MSDS v001 IT
5469 Wax Brown Aerosol PP MSDS v001 NL
5469 Wax Brown Aerosol PP MSDS v001 PL
5469 Wax Brown Aerosol PP MSDS v001 UK
5469 Wax Brown Aerosol PPI TDS NL v001