COLD ZINC

Cold Zinc is a special rust-resistant coating based on zinc phosphate. The product can be used both before and after welding. Cold Zinc provides a protective layer that can later be welded perfectly with CO2 as well as spot-welded. It will not splatter during welding and will only minimally burn. This ensures a very high level of protection. By adding epoxy to the product, a unique top layer is created that can serve perfectly as a primer for almost all sealants and paint systems after curing. Suitable Nozzles: art. 0039 - WIDE JET (XL) and art. 0038 - WIDE JET (M)

For treating galvanized and untreated steel.

• The surface must be clean, dry, and free of grease.• Remove loose old paint residues and rust, then sand.• Processing temperature 15 to 25°C.• Shake the spray can well for 2 minutes before use and spray a test piece.• Distance to the surface to be treated about 25 to 30 centimeters.• Apply the spray in multiple thin layers.• Shake the spray can again before applying the next layer.• After drying, if desired, a topcoat can be applied.• After use, clean the valve (hold the spray can upside down and press the spray head for about 5 seconds).• The drying time depends on the ambient temperature, humidity, and the thickness of the applied layer.