MS SPEED

MS Speed is a high-quality professional construction and assembly adhesive with an extremely high initial adhesion based on hybrid technology, which cures into a durable elastic rubber under the influence of humidity.

MS Speed is specially developed as a universal adhesive for bonding many building materials, such as: stone, concrete, mirrors, glass, plaster, PU, PVC, hard plastics, enamel, ceramics, copper, lead, zinc, tin, aluminum, metals, alloys, stainless steel, HPL and cement fiber boards, and wood.

Apply the adhesive in vertical grooves with the help of the supplied V-notch nozzle. Spacing between grooves should be 10 to 20 cm. Then press the materials together until there is a minimum distance of 2 to 3 mm between the bonded material and the substrate. Do not apply with dots! Due to the high initial strength, support during curing is usually not necessary! Application temperature: +5°C to +40°C (applies to environment and substrates). Substrates must be clean, grease-free and dust-free. Always degrease substrates well. Always test substrates beforehand, MS Speed adheres perfectly without primer on most non-porous substrates. Treat porous substrates with a primer beforehand! (ask for info)• Not suitable for continuous water exposure • Not suitable for movement joints • Not suitable for use with chlorine (swimming pools)