EASY FIX

UV & water resistant Polysiloxane

Sanitary facilities provided
Alkoxy technology
Suitable for tempered glass
Good adhesion without primer on many surfaces

Easy Fix is a neutral curing, elastic, one-component polysiloxane. This polysiloxane has a high skin elasticity shortly after skin formation and can therefore be loaded shortly afterwards. In addition, this kit has a durable elastic recovery capacity after curing. The Easy Fix has good adhesion even under extreme climatic conditions. Easy Fix is highly resistant to yellowing.
Easy Fix is specially suitable for sealing window connections, joints, other movement joints, and for sealing joints in sanitary and wet rooms. It provides a durable and good adhesion on most substrates, such as anodized aluminum, poly-acrylates, painted wood, glass, concrete, ceramic, plastic, etc. Easy Fix can be used in pools with chlorinated water. There are some conditions attached to this. The substrate must be dry, grease-free, and dust-free. The use of Multi Primer Transparent is mandatory. The product must be completely cured before filling the pool. Extreme changes in chlorine levels should be avoided. We also have a certificate for use in dust-free rooms and medical environments.
Pre-treatment of the substrates:
The substrates must be clean, dry, dust- and grease-free. Clean non-absorbent substrates with Multi Primer Transparant. For PVC profiles, we recommend pre-treatment with a mixture of Isopropyl alcohol (IPA-industrial alcohol) and water in a ratio of 1:1, to achieve optimal adhesion.
Processing:
Apply glazing tape for a glazing top seal. The minimum joint cross-section should be 3 x 5 mm. When determining the joint size, choose the joint so that the MTV (maximum allowable deformation) of the Easy Fix is not exceeded. Fill the joints with PE or PU backer rod and secure at the correct joint depth. Oils, tar, and bituminous backer rods such as rubber-based, chloroprene, or EPDM materials are not suitable.
Joint filling:
Apply Easy Fix without air entrapment in the joint. Fill the joint completely. Smooth the sealant with a suitable spatula. Optionally, ProPart Easy fluid can be used.
Cleaning:
Fresh and uncured sealant can be removed with Bond Ex. Fully cured material can only be removed mechanically with suitable tools.
The substrates must be clean, dry, dust- and grease-free. Clean non-absorbent substrates with Multi Primer Transparant. For PVC profiles, we recommend pre-treatment with a mixture of Isopropyl alcohol (IPA-industrial alcohol) and water in a ratio of 1:1, to achieve optimal adhesion.
3201 3214 Easy Fix PP MSDS v002 DE
3201 3214 Easy Fix PP MSDS v002 EU
3201 3214 Easy Fix PP MSDS v002 FR
3201 3214 Easy Fix PP MSDS v002 IT
3201 3214 Easy Fix PP MSDS v002 NL
3201 3214 Easy Fix PP MSDS v002 PL
3201 3214 Easy Fix PP MSDS v002 UK
3200 tm 3214 Easy Fix PPI TDS NL v001

Variants

Article number	Color	Specification	VPE	EAN
3201	Silver Grey - RAL 7047	310 ml	24	8719214110550
3202	Grey Matt - RAL 7030	310 ml	24	8719214110567
3204	Bahama Beige Matt - RAL 1001	310 ml	24	8719214110581
3206	Jasmin - RAL 1013	310 ml	24	8719214110604
3208	Transparent	310 ml	24	8719214110628
3209	Transparent/Grey - RAL 7035	310 ml	24	8719214110635
3210	White Matt - RAL 9010	310 ml	24	8719214110642
3211	Black Matt - RAL 9005	310 ml	24	8719214110659
3212	Manhattan Matt - RAL 7038	310 ml	24	8719214110666
3213	Stone Grey Matt - RAL 7039	310 ml	24	8719214110673
3214	Anthracite Grey Matt - RAL 7010	310 ml	24	8719214110680