CUTTING POLISH

Cutting Polish is a particularly user-friendly, silicone-free polishing compound with a high content of abrasives for heavily weathered and scratched paint. Cutting Polish is ideal for preparing heavily weathered paint surfaces and reliably removing coarse signs of use and spray mist. Due to the high proportion of friction bodies, Cutting Polish is the optimal base level for any paint preparation. Cutting Polish can be easily polished off without hologram formation and only causes a small amount of dust.

• For polishing heavily weathered or scratched paint • To find the color of heavily weathered paintwork • For treating paintwork after mixing • To remove paint overspray and correct paint defects and dust inclusions • Polishing of plastics and plexiglass • Cutting Polish is not suitable for scratch-resistant paints • Use of IP 420 or LP 420 from Pro Part is recommended

Do not use Cutting Polish in direct sunlight. The paint surface to be worked on should not be too hot or extremely cold. Clean the surface beforehand with water and possibly with a suitable shampoo. For optimal results, Cutting Polish should be applied with a suitable polishing cloth or, even better, with a polishing machine. Shake the Cutting Polish vigorously before use. Apply in sections with a soft cloth or polishing machine and polish with circular movements. The cutting power can be controlled with different polishing attachments (hard or soft). Let the white haze work for a while and then polish it off with a clean, soft cloth (tip: microfiber cloth blue / yellow / pink). Immediately wash off any unpainted plastic with a sponge and plenty of water. To seal the surface, we recommend Speed Gloss SG 423 (silicone-free) or paint sealant LV 421 from Pro Part!