FAST FIX THICK is a fast-acting adhesive based on cyanoacrylate. Is a 1-component adhesive without solvent which contains for the biggest part ethyl cyanoacrylate monomer. Fast fix-thick is resistant to solvents, oils, benzene, temperature fluctuations and atmospheric influences.
Fast fix-thick allows a strong bonding between the most different materials, with the exception of materials which contains polyethylene, polypropylene and fluorine.
Weld able materials:
ABS, aluminium, Bakelite, brass, butyl, chloroprene, chrome, delrin, glass, cupper, natural rubber, NBR, neoprene, nitrile, phenol, polycarbonate, polystyrene, porcelain, hard PVC, stainless steel. It is recommended to use Activator on porous materials.
The parts which are to be adhered to one another should be clean and free of oil and grease.
Applying a thin layer of glue on one side and compress the portions.
The hand-resistance will be dependent on the type of material obtained after a few seconds.
Final strength after 24 hours. In order to accelerate the hardening our Activator may be used.