- Bonds in seconds
- High shear strength and no shrinkage
- Economical – the thinner the adhesive layer the stronger the connection
FAST FIX THIN - thin is a fast-acting adhesive. Fast fix - thin is a
1-component adhesive without solvent which contains for the biggest part ethyl cyanoacrylate monomer.
Fast fix-thin makes a strong bond between the most different materials, with the exception of materials containing polyethylene, polypropylene and fluorine.
Weldable materials:
ABS, aluminium, Bakelite, brass, butyl, chloroprene, chrome, Delrin, glass, copper, natural rubber, NBR, neoprene, nitrile, phenol, polycarbonate, polystyrene, porcelain, hard PVC, stainless steel, steel.
On porous materials it is recommended to use Activator.
The parts that need to be glued to each other, must be clean and oil- and grease free. Apply a thin layer of superglue on one side and press the parts together. The hand resistance is depending on the type of material after a few seconds. End resistance after 24 hours. To speed up the hardening our Activator can be used.