✔︎ Very easy to Brush
✔︎ Pulls no wires
✔︎ Displays original structure
✔︎ Very strong adhesion
BRUSHABLE SEALER is a unique brushable standard bodywork kit for the professional sealing of body parts. The product is perfect brushable continues until a factory original structure without pulling threads or dry. While drying, brush able sealer preserves the applied texture. It does not flow out, does not tear and has minimal shrinkage. Moreover, the product has a neutral smell. Brushable sealer is permanently elastic and gives through its strong adhesion also a perfect protection to the substrate. Due to its fast drying Brushable sealer can be sprayed over after a short time.
Brushable sealer is inter alia used to seal seams such as metal overlaps, welding and folded seams which occur in engines, trunk spaces and doors. Also be used as general seam seal in i. A.:
Damage repair companies
Air pipes, air conditioning construction
The surfaces to be treated must be clean, dry, rust, dust and grease free. Brushable sealer is to apply quickly and drip-free with a clean, stiff brush (nylon). Fill the seal parts until the desired thickness is achieved and ensure that does not occur too much air inclusion. The skin formation follows after about 30 minutes. Full cure occurs after 1 to 2 days, depending on the applied film thickness, temperature and humidity.