EASY FLUID CONCENTRATE is a neutral universal tool for the wet tooling of sealants in joints.
Easy Fluid is more than 90% organic degradable. Easy Fluid is suitable for a flawless finish of all joints in most kinds of bonds that harden under the influence of humidity: acrylic, silicone, polyurethanes and MS polymer sealants.
Applications by natural stone: after curing rinse with clean water. In susceptible substrates: if necessary tests on a non-visible location. If one wants the kit to paint afterwards, repainting or refinishing: curing the sealant, wipe with a damp cloth and wipe dry.
Mixing ratio: 1 up to 3 parts Easy Fluid Concentrate to 100 parts water. After combining the two components (easy fluid concentrate / water) stirring until a homogeneous mass. An incorrect mixing ratio may leave soap residue, allowing for compatibility is affected and can cause stains on the surface. After the application of the sealant, the joint surface and the adjacent materials for evenly wetting with diluted easy fluid concentrate. After this you can finish the joint smooth and sleek with a joint blade, putty knife or PVC pipe. Possibly level out the joint with diluted Easy Fluid Concentrate. Too much made Easy Fluid Concentrate can be removed with water.