EASY FLUID

Easy Fluid is a neutral universal tool for wet wiping of sealant joints. Easy Fluid is more than 90% biodegradable. Easy Fluid is suitable for a flawless finish of all joints in most types of sealants that cure under the influence of humidity: acrylic, silicone, polyurethanes, and MS polymer sealants.

Applications on natural stone: rinse with clean water after curing. For sensitive surfaces: if necessary, test in an inconspicuous area. If the sealant is to be painted, overlaid, or resprayed afterwards: allow the sealant to cure, wipe with a damp cloth, and dry wipe.

Easy Fluid (art. 2500/2505) After the sealant has been applied, moisten the joint surface and adjacent materials with the diluted Easy Fluid using a brush or a flower sprayer. Then finish the joint with a putty knife, joint wood, or PVC pipe. After the joints have been smoothed out, they can be smoothed out further with the fingers, moistened with diluted Easy Fluid. After using Easy Fluid, it is advised to clean or rinse the surfaces with water to prevent any residue from forming. Residues of Easy Fluid can have a negative influence on the flow behavior and adhesion of paint.Easy Fluid Concentrate (art. 2515) • Mixing ratio: 1 to a maximum of 3 parts Easy Fluid Concentrate to 100 parts water. • After mixing the 2 components (Easy Fluid Concentrate / water), stir until a homogeneous mass is formed. • In case of an incorrect mixing ratio, soap residues may remain, affecting the paintability and causing stains on the surface. • After applying the sealant, evenly moisten the joint surface and adjacent materials with diluted Easy Fluid Concentrate. • Then finish the joint smoothly and tightly with a joint wood, putty knife, or PVC pipe. • Optionally, smooth out the joint with diluted Easy Fluid Concentrate. • Remove excess diluted Easy Fluid Concentrate with water.