PROTECTION PRIMER

Protection Primer is a high-quality, fast-drying primer for the pre-treatment of treated and untreated surfaces of wood, metal, aluminum, glass, stone, eternit, and earthenware. Suitable Nozzles: art. 0039 - WIDE JET (XL) and art. 0038 - WIDE JET (M)

Suitable primer as pretreatment for finishing with alkyd resin, nitrocellulose, 1-component acrylic, and 2-component acrylic coatings.

• Before use, read and follow the instructions on the packaging carefully. Pre-treatment: • The surface must be clean, dry, and free of grease. • Remove loose old paint residues and rust, then sand. Treatment: • The surface must be clean, dry, and free of grease. • Bring the aerosol can to room temperature. • Ideal processing temperature is 15 to 25°C. • Shake the aerosol can well for 2 minutes before use and spray a test piece. • Distance to the surface to be treated approximately 25 to 30 centimeters. • Apply the primer in several thin layers. • Shake the aerosol can again before applying the next layer. • After use, clean the valve (hold the aerosol can upside down and press the spray head for about 5 seconds). • The drying time depends on the ambient temperature, humidity, and the thickness of the applied layer.