FILL PRIMER

For the pre-treatment of treated and untreated surfaces of:

• Wood

• Metal

• Aluminum

• Glass

• Stone

• Eternit

• Earthenware

Suitable primer as pre-treatment for finishing with alkyd resin, nitrocellulose, 1-component acrylic, and 2-component acrylic paints.

Pre-treatment:

• The surface must be clean, dry, and free of grease.

• Remove loose old paint residues and rust, then sand.

Treatment:

• The surface must be clean, dry, and free of grease.

• Bring the spray can to room temperature.

• Ideal processing temperature is 15 to 25 °C.

• Before use, shake the spray can well for 2 minutes and spray a test piece.

• Distance to the surface to be treated should be about 25 to 30 centimeters.

• Apply the primer in several thin layers.

• Shake the spray can again before applying the next layer.

• After use, clean the valve (hold the spray can upside down and press the spray head for about 5 seconds).

• The drying time depends on the ambient temperature, humidity, and applied layer thickness.