Nederlands    Deutsch    English    Français
Back
5450 t/m 5451

PROTECTOR COAT SPRAY

 

✔︎ 100 % PVC free

✔︎ Paintable after 10 minutes

✔︎ Continually elastic

✔︎ Special rubber base free

PROTECTOR COAT SPRAY 500ml is a wet on wet re paintable anti corrosion and stone chips spray with sound-proofing properties on the basis of synthetic resins. After evaporation of the solvent remains a film with good protection against varying climatic influences and flying gravel. Easy sanding after drying.

Protector Coat spray is used as anti-corrosion coating and stone chip protection bodywork frames, fenders and mudguards. The products can be used in for example:

  • Automotive

  • Garages, workshops

  • Bodywork shops

  • Bus construction

  • Do-it-yourself market

  • Shake well before use.

  • Processing at room temperature.

  • No parts to be treated well capping.

  • The surfaces to be treated must be clean, dry, rust, dust and grease free.

  • Spray an even layer about 30 cm from the surface to be treated.

  • Recommended drying: IR or oven drying.

  • Keep the aerosol after using upside down for about 3 seconds by spraying, thereby preventing clogging of the valve.

Article number:
Color:
Packing unit:
Substance:
EAN code:
5450
Noir
12
500 ml
-
5451
Gris
12
500 ml
-
Article number:
5450
Color:
Noir
Packing unit:
12
Substance:
500 ml
EAN code:
-
Article number:
5451
Color:
Gris
Packing unit:
12
Substance:
500 ml
EAN code:
-