✔︎ 100 % PVC free
✔︎ Paintable after 10 minutes
✔︎ Continually elastic
✔︎ Special rubber base
PROTECTOR COAT is a protective layer without isocyanates having an excellent corrosion-protecting and a sound-insulating effect. Protector coat is on a special base rubber, 100 % PVC-free and is intended for restoring factory original structures. It makes a perfect adhesion on bare surfaces or surfaces which have been treated with adhesion primers etching. Furthermore, it remains constantly elastic, but it is dry very good to sand. After 10 minutes with any modern car paint paintable.
For repairing and mimicking several original structures in car doors, sills, at the bottom of the cars, as also occur in spoilers and cowlings.
For apply a minimum temperature of 15°C is available.
Spray distance should be about 20 cm.
Surface should be clean, dry and free of grease.
Degrease with Degreaser Profi.
Protector coat may be provided as necessary in multiple layers. In between layers 10 minutes evaporate. Recoat able after 10 minutes (ideal time) up to 4 hours.
At a later time roughening or use plastic primer.