✔︎ Powerful bonding pre-treatment
✔︎ For gluing on non-absorbent surfaces
✔︎ For sealing non-absorbent surfaces
✔︎ Activator for the surface
MULTI PRIMER TRANSPARENT MPT 506 is a pre-treatment for:
For pre-treating non-absorbent surfaces such as:
Plastics such as:
The parts to be bonded need to be clean, dry and grease-proof.
Applicate Multi Primer Transparent MPT 506 to the parts to be bonded and allow to dry at least 10 minutes.
When applying always rubbing in one direction.
The treated parts must be bonded within 24 hours.
By materials not mentioned or doubt, always perform an adhesion test.