✔︎ Super elastic properties
✔︎ Low expansion quality
✔︎ Permanently elastic
✔︎ Excellent adhesion
FLEX FOAM has been specially developed for the airtightness and thermal insulation of joints around window frames and architectural structures. Due to the permanent elasticity, a durable and highly insulating airtight seal can be created, even in dynamic joints where movement is expected. After application, the foam layer expands and application at low temperature is also possible
Flex Foam is ideal for use:
Remove dust, grease or other contaminants from the surfaces. If necessary, moisten dry surfaces before using Flex Foam for better results. Protect adjacent surfaces with paper, plastic wrap, or other suitable material.
Shake the package vigorously for at least 30 seconds. When mounting the softening gun it is important that the packaging is attached upright. (do not turn the packaging upside down on the gun, but turn the gun on the upright packaging)
Make sure the gun is not pointed at other people when reassembling. The amount of foam that comes out of the gun can be determined by adjusting the gun trigger on the back of the gun. For best results it is possible, if necessary, to moisten each layer of foam slightly with water.