CHEMICAL ANCHOR - ETA APPROVED

Chemical Anchor - ETA Approved is a fast-hardening 2-component fixing material based on synthetic resin. Chemical Anchor - ETA Approved is ideal for use near corners (unlike expansion anchors such as wedge bolts) as there is no pressure build-up in the fixing points. ETA APPROVED.

As a chemical anchor for threaded rods, screws, and bolts in solid and hollow substrates such as concrete, aerated concrete, brick, and hollow brick. For the solid and durable anchoring of frames, shutters, and handrails in building structures. As a plastic repair mortar for concrete.

• Drill the hole with the correct diameter and depth. • Remove dust and debris from the drilled hole. • For optimal strength, the distance between the center of two drilled holes should be at least 2.5 times the depth of the hole and 1.25 times the depth of the hole for the distance to the edge. • Place the mixing nozzle on the cartridge and insert the cartridge into the gun. Squeeze the material out of the mixing nozzle. Do not use the first 10 cm. • Apply an evenly mixed Chemical Anchor in the desired amount into the pre-drilled hole. Start at the bottom of the hole. Place the threaded rod or screw in the still paste-like Chemical Anchor and if necessary, secure it during the curing time. • If the threaded rod or screw needs to be removed later, apply vaseline to it beforehand. • Replace the mixing nozzle if the processing time has been exceeded.