- UV and water resistant
- Good coverage
- Provides durable adhesion for panel bonding products
- Black colour
PANELBONDING PRIMER BLACK is a black coloured, liquid pre-treatment for improving the adhesion.
Pre-treatment of clean-planed wooden support structures for panel bonding. For a durable bond.
Substrate:
The substrate must be clean, dry, dust- and grease free. Wood moisture maximal 18 %.
Preparation:
Shake the closed package before use.
Keep the container tightly closed until the moment of processing.
Do not process the Primer from the container.
Pour as much Primer in a clean, dry paint roller paint tray (or can) as can be used within 30 Minutes.
No longer use Primer remains.
Close the Primer container immediately.
The primer may be applied prefabricated but after application one should pay attention to load with dust.
Avoid contact with the cleaned and primed surfaces, as this may adversely adhesion influence.
Processing of the primer and to the seal or bonding at very high humidity, for example, in dense fog, is discouraged.
Application:
The primer should be applied with the application set and clean short pile roller or a suitable clean brush.
Provide the adhesion surface primer such that the primer forms a continuous layer or film.
Apply the primer in one layer thick enough.
Working temperature:
from +5°C to +30°C.
Drying time:
Minimum drying time 60 minutes.
Consumption Indicator:
Per 100 m2 of facade panel is roughly 4 litres Panel Bonding Primer Black needed.